High Efficiency Cross Flow Gasketed Stainless Steel Heat Exchanger Plate Heat Exchanger for Heat Recovery

High Efficiency Cross Flow Gasketed Stainless Steel Heat Exchanger Plate Heat Exchanger for Heat Recovery

Applications

HVAC industry - e.g. district cooling solutions using seawater and groundwater as cooling source - e.g. district heating solutions using, for example, solar and geothermal energy as heating source

Marine/offshore industry - e.g. central and lubrication oil cooling

Dairy/food/beverage industry - e.g. pasteurization, heat recoveries, and duties that require gentle treatment

Sugar industry

Biogas industry

Pulp and paper industry

Heavy industry

Mining industry

Petrochemical industry

Chemical industry - e.g. waste heat recovery from condenser water

To assemble a gasket plate heat exchanger, the following three steps should be followed:

1) The frames are put together. It consists of a fixed and moveable frame plate, top carryings bar, bottom guiding bars, tightening bolt, support column, and frame foot. The end plate is the first plate to be hung in the frame.

2) Then, the plate, according to the plate specification is placed between the frames, within the upper carrying bar and the lower guiding bar.

3) Lastly, the tightening bolts are installed to tighten the space between the fixed and movable frames using a spanner or a hydraulic wrench to a predetermined level depending on the model and number of plates of that plate heat exchanger.