English 
Views: 0 Author: Site Editor Publish Time: 2023-05-17 Origin: Site
The advantages of a Brazed Heat Exchanger include its small size, high efficiency, low cost and easy maintenance. They are most commonly used in industries such as power generation, refining, petrochemical processing, food processing and others where they provide efficient thermal exchange solutions. With proper knowledge regarding its function and design features, you can choose the right Brazed Heat Exchanger for your applications.
The Benefits of the Brazed Heat Exchanger
The Different types of Brazed Heat Exchangers
What are the precautions when cleaning Brazed Heat Exchanger?
There are many benefits to the Brazed Heat Exchanger. One of the most notable benefits is its ability to handle high temperatures. This is due to the fact that the brazing process produces a very strong bond between the metal plates. This results in a heat exchanger that can withstand high temperatures without leaking.
Another benefit of the Brazed Heat Exchanger is its compact size. This makes it ideal for use in space-saving applications. Additionally, the compact size also allows for easy installation and maintenance.
The Brazed Heat Exchanger is also highly efficient. This means that it can transfer heat quickly and efficiently between two fluid streams. This results in less energy being required to operate the heat exchanger, which can save money on operating costs.
There are four different types of Brazed Heat Exchangers, each with their own set of benefits and drawbacks.
Plate Heat Exchanger:
-Benefits: High thermal efficiency due to large surface area, can be used with a variety of fluids, modular design allows for easy maintenance and expansion
-Drawbacks: High initial cost, require more maintenance than other types of Brazed Heat Exchangers
Shell and Tube Heat Exchanger:
-Benefits: Can handle high pressures and temperatures, widely available and relatively low cost
-Drawbacks: Lower thermal efficiency due to smaller surface area, can be more difficult to clean and maintain
Bundled Tube Heat Exchanger:
-Benefits: Higher thermal efficiency due to multiple small tubes that provide a larger surface area, can be used with a variety of fluids
-Drawbacks: More expensive than shell and tube heat exchangers, require more maintenance
1. Inject the cleaning agent from the bottom of the plate heat exchanger, and drain the water that needs to be cleaned on one side of the plate heat exchanger;
2. Install a ball valve (not less than 1 inch = 2.54 cm) between the isolation valve and the Alfa Laval Brazed Heat Exchanger; install both the water inlet and the return water port; connect the pump and the conduit.
3. Flow out from the top; start to inject the required cleaning agent into the plate heat exchanger, after all injection, cycle cleaning.
4. If all the cleaning agent is injected at the beginning, it may cause overflow of cleaning agent;
5. During the cycle, the effectiveness of the cleaning agent should be checked regularly, and PH test paper can be used.
Gansu Nuochen Petrochemical Equipment Co. , Ltd. was established in 2014, mainly engaged in detachable plate heat exchanger, full welded plate heat exchanger, wide channel welded plate heat exchanger, round shell heat exchanger, plate shell heat exchanger, two-stage Cooler, plate heat exchanger unit, which is a collection development, design, production and service as one of the enterprse.
